Modified 2 years, 6 months ago. Web i get the following error: Found one way to try and fix it. No md superblock detected on /dev/sdb1. I'm trying to mount my hdd, /dev/sdb, which is connected via an enclosure but every.
No such file or directory while trying to open /dev/sdc1 couldn't find valid. This is external hdd that i connect via usb. Mount /dev/sda1 can’t read superblock. 3 turns out the hard drive is not getting enough power and that's why the raspberry pi can't read it properly. Then type p to print the partition table on the disk.
No md superblock detected on /dev/sdb1. Web last night my android phone said it can't read the sd card and it wanted to format it. Mount /dev/sda1 can’t read superblock. Web 试图通过 sudo umount /dev/sda 先取消挂载,再重新 sudo mount /dev/sda /bioinfor 挂载到/bioinfor路径,结果报错。. Its scary because i dont know if it can be fixed or is it toast.
No md superblock detected on /dev/sdb1. Mount can't read superblock on /dev/sda5. Web 1 linux ubuntu 14.04 (azure server) i was trying to backup /dev/sda1 drive so i executed the sudo dd if=/dev/sda1 of=/dev/sdc1 command. Modified 2 years, 6 months ago. Found one way to try and fix it. Mount /dev/sda1 can’t read superblock. I started it with a live usb ubuntu. My notebook couldn't start anymore. Web last night my android phone said it can't read the sd card and it wanted to format it. Web asked 9 years ago. Can't read superblock on / dev /loop15怎么解决 Its scary because i dont know if it can be fixed or is it toast. I use my/dev/sdb as an example. Can't read superblock on /dev/sda5. This is external hdd that i connect via usb.
Mount /Dev/Sda1 Can’t Read Superblock.
Can't read superblock on /dev/sda5. Wrong fs type, bad option, bad superblock on. I started it with a live usb ubuntu. Then type p to print the partition table on the disk.
Web 试图通过 Sudo Umount /Dev/Sda 先取消挂载,再重新 Sudo Mount /Dev/Sda /Bioinfor 挂载到/Bioinfor路径,结果报错。.
My notebook couldn't start anymore. Its scary because i dont know if it can be fixed or is it toast. No md superblock detected on /dev/sdb1. This is external hdd that i connect via usb.
Nothing Out Of The Ordinary That I Can Tell.
Can't read superblock on /dev/mapper/media1. Found one way to try and fix it. [root@mediaserv ~]# mount /dev/mapper/media1 /media mount: No such file or directory while trying to open /dev/sdc1 couldn't find valid.
3 Turns Out The Hard Drive Is Not Getting Enough Power And That's Why The Raspberry Pi Can't Read It Properly.
Can't read superblock on / dev /loop15怎么解决 So i tried the commands below: Mount can't read superblock on /dev/sda5. Web 1 answer sorted by: